| ScanAir Pro | ScanAir | |
Specifications |
||
| Features | Ergonomic and Lightweight Touchscreen User Interface Upstream and Downstream Mode of Measurement Automatic Calculation of Alarm Threshold Scan & Size Leaks Display Percentage Leak During Downstream Mode Display Upstream or Downstream Measurements |
Adjustable Scan Head 1.0 CFM (28.3 LPM) Flow Rate Remote Start/Stop Button Remote Power and Alarm LEDs Remote Audible and Visual Alarm Lightweight 7-oz Design Standard 3 Meter (10 foot) Cable(Optional 3 Meter Extension Cable Available) Easily Integrates with SOLAIR Airborne Particle Counters (GEN E and Newer) Facilitates ISO 14644 Compliance Testing Includes Headphone Jack With Adjustable Volume Ideal for using from Ladders, Scissor Lifts or in Hard-to-Reach Places |
| Benefits | Only Solution for Testing PTFE Media Filters Ability to Challenge Test Filters With a Much Lower Concentration Than a Photometer Virtually No Coalescence of Aerosol Use PSL and PAO for Filter Challenge Testing Multi-Function System Allows Instruments to be Utilized for Other Applications |
2 Year Warranty Ergonomic and Lightweight International Support Low Cost of Ownership |
| Applications | Test HEPA Filters and PTFE Media Filters Scan Filter Media for Leaks Cleanroom Classification Provide a Measurement of Filter Efficiency Test Pressurized Gas |
Filter Efficiency Testing Filter Leak Testing Cleanroom Monitoring Facility Certification |
Environmental Conditions |
||
| Operating | 50°F to 104°F (10°C to 40°C) / 20% to 95% non-condensing | |
| Storage | 14°F to 122°F (-10°C to 50°C) / Up to 98% non-condensing | |
The Lighthouse Scan Air provides an easy-to-use means of checking HEPA / ULPA Filters and their seals for leaks and efficiency.
The Scan Air incorporates an Isokinetic probe specifically designed for a sampling flow rate of 1.0 CFM (28.3 LPM) across a wide area.
The Scan Air includes a Remote Start/Stop button and 7.62 meter (25-foot) cable. The Remote switch features hands-free operation of the SOLAIR portable particle counter enabling the user to efficiently sample in compliance with ISO 14644.
The on-board alarm buzzer and LED quickly notify the user if a count exceeds the alarm threshold, even when the Scan Air is being used in a high noise environment. The twist-lock connector quickly and easily connects or disconnects the Scan Air from a Solair portable particle counter.
The Solair and Scan Air can be used as a portable contamination detection system throughout the cleanroom environment.
Key Features:
Key Features:
Knowledge Center
Stay in the Know!
Get the scoop on new products, the latest tech papers, webinars and more…
